Electrogravitics
Alexander V. Frolov
POB 37, St.-Petersburg, 193024,
Russia
a2509@yahoo.com
Back to Main Page
Back to Gravitation Page
Some images are presented here to demonstrate this
technology is not something complex, but in general the ideas are very
simple. I need help to patent it and to work on dissertation in some experimental
laboratory. T-shape capacitor is the method to get co-directional electric
forces those are acting on positive and negative plates of the capacitor.
Some simple expeirments were made to detect the force:
Red and grey wires (output of high voltage source) connected to T-capacitor
by means of thin wires
Now the power is "on" and weight-machine demonstrate the change of
the weight.
Experiment was re-produced in France, May 2000
. 
. 
Look video about this experiment: http://members.xoom.com/jlnlabs/html/elghatv1.htm
Jean-Louis Naudin
Email: Jnaudin509@aol.com
You can download MPEG short file about
other my experiment and order CD. Sure, technological
details will take several years to get commercially available project but
it is the question of financial power only. There are many information
about the topic, for example it is well-known patents
by T.T.Brown, but main technological methods can be described in several
words: it is asymmetry in electric charged surface, asymmetry (gradient)
in properties of dielectrics or in its topology. I developed the idea in
some papers to prove single terminal (electrically
charged body) can be used as drive if it is creating asymmetrical (gradiental)
electrical field around itself. When people think about the idea there
is a problem to understand where is the "second plate" of this capacitor.
If you know N.Tesla's work, there is no such sort question. But in general
the answer is difference between single terminal and "potential on infinity
distance" that is equal to zero. So, second plate is not necessary and
simple hemisphere will produce some trust if it is electrically charged.
There are special methods to increase the effect and this technology can
be made for low voltage also, for example for 1000V instead of 50 kV T.T.Brown
and others used.
Sure, in my home laboratory there are no "flying saucers" but some
force can be detected easy.
In this version of experiment a plastic disk was used as a base for
two electrodes: flat aluminum foil (right side on photo) and cylindrical
copper electrode (left side). There is only one wire that is connected
to high voltage source of 3 KV. Force direction here is from right to left.
Rotation in this case is produced by asymmetry of electric potential
field structure in dielectric area between cylinder and flat plate.You
can see this experiment on CD
Back to main page